What wet magnetic separator is the best method of operation.
2015-02-01 by fnsmagnetics
1. Wet magnetic separator must be fully checked before work is properly operating mechanism ministries, wipe with a thin cotton rocker rail grade grease lubricants clean and press.
2. Wet magnetic separator rocker and headstock ministries locking, can only operate.
3. wet magnetic separator shall be no obstruction in the arm rotation range.
4. Before wet magnetic separator open splintered mechanical, magnetic machine table, the workpiece, fixtures, cutting tools, you must find a positive fastening.
5. The correct selection of wet magnetic separator spindle speed, feed rate, not overload use.
6. drilling beyond the table, the workpiece must be stable.
7. wet magnetic mechanical machines in operation and automatic feed, and not to change the tightening exchange rate, if the spindle speed can only be completely stopped, can take place.
8. wet magnetic separator and measuring the workpiece handling and cutting must be carried out in the shutdown, and not directly with the hand piece drilling, not wearing gloves.
9. wet magnetic separator work were found to have abnormal sound, you must immediately stop check troubleshooting.